The purpose of this product is to maintain the maximum horsepower by keeping the temperature of the cooling water at around 75 80 . It activates the fan at 80 instead of 95 and fully utilizes the water characteristics of high specific heat (Water changes temperature slowly for both upward and downward). As a result, it works toward preventing power loss, knocking, and various thermal negative effects. It works well for all types of cooling system from the stock radiator to a multi layer racing radiator.
Cooling fan activation at 80 (stock 95)
Cooling fan deactivation at 75 (stock 90)
There is a close relationship between the water temperature and engine power.
When the cooling water temperature reaches a certain point, in order to avoid possible risks, the ECU will make several changes including fuel increase and retarding the ignition point which will cause a reduction of engine power.
Furthermore, by setting the cooling fan activation point (80) and deactivation point (75) closer, it smoothes out the on-off flipping operation.
Not only this works extremely well with the high capacity racing radiator, but it makes a big difference for the street type setup (stock radiator + low temp thermostat + low temp thermal switch + high efficiency coolant).??With this street setup, the water temperature will stay at around 80??for street driving.
Notes: Please use it along with the low temp thermostat. When used separately, it is not very effective. Please use the proper tightening torque. After the installation, bleed the air completely.